Estimate the impact of dust-related stops, rejects and restart losses in paper, board and packaging processes
Dust in paper, board and printing production is not always measured as a separate cost. It often appears as repeated short interruptions: extra cleaning, plate washing, print defects, rejected sheets, unstable runs or slower restarts. Those interruptions may look minor on their own. Over a month, they can add up to a visible loss in available production time.
Use this calculator to estimate the monthly and yearly impact of dust-related stops in your production process. The result is intended as a practical indication, not as a guaranteed ROI calculation.
From nearly visible dust to measurable production loss
Dust and loose particles affect quality, uptime, and equipment performance. This article explains why dust and contamination are not only a housekeeping issue, but also a factor that influences product quality, machine reliability, and production continuity.
In packaging and printing, contamination also leads to avoidable waste, extra cleaning and production interruptions. Here, the substrate’s quality and recycling cycles are important factors.
Productivity potential assessment tool
After you enter your information, this calculator provides an estimate of hidden losses; the result is displayed immediately and is only visible to you.
Enter conservative figures where exact data is not available. The calculated outcomes will then be displayed under “Estimated results”:
- lost production time per month;
- estimated production value lost;
- optional waste cost;
- estimated yearly impact;
- a result category for follow-up.
The calculator can be used for different paper, board, and printing environments. For corrugated board production, it is especially relevant when dust-related interruptions affect downstream printing, plate washing intervals, or sheet cleanliness.
How to understand your result
The calculator does not assume that all dust-related loss can be recovered. It simply helps estimate the scale of the issue.
A technical review is useful when the calculation shows recurring loss, especially if the stops are connected to:
- extra plate washing;
- print defects;
- dust on sheets or webs;
- rejected material;
- customer complaints;
- unstable longer runs;
- increased cleaning intervals;
Measured result in corrugated production: Model Group
At Model Group’s corrugated plant in Czosnów, Poland, dust from the slitter/scorer and cut-off affected printing performance, plate washing and plant cleanliness. Weducon installed Corrucleaner® cleaning systems at two critical positions: directly after the slitter/scorer and directly after the cut-off.
After commissioning, Model’s production team monitored wash intervals and operational performance. The reported improvements included approximately 8 hours per month of additional available production time, fewer extra plate washing stops, improved print consistency during longer runs and no more customer claims related to dust-driven print defects.
In terms of time, we save approximately eight hours per month. This is driven by the elimination of extra plate washing previously required due to dust contamination and residues originating from the corrugator’s slitter/scoring section.
Grzegorz Czarnota, Plant Manager, Model Group
Different processes, different dust behavior
Dust-related production loss does not look the same in every market. A corrugator, paper manufacturing process, label line, or sheet-fed or digital printing process each has its own dust sources, substrate behavior, and quality risks.
Use the result as a starting point. Weducon can review the production situation in relation to your market, substrate, machine layout and cleaning objective.
Suggested internal links:
Want to discuss your figures with Weducon?
Every production line is different. If your result shows recurring dust-related loss, Weducon can help review where the contamination is generated, how it moves through the process and whether web or sheet cleaning could reduce interruptions before they affect quality or uptime.










